Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

34.9mm Dropper Post Shaft Clamp34. 9 mm Dropper Post Shaft Clamp Tool Engineered for modern 34. 9 mm oversize droppers. This clamp provides the holding power needed for larger posts, distributing force evenly to protect the anodized finish while you service cartridges and head assemblies. Why You Need This Oversize 34. 9 mm shafts require higher holding force to loosen cartridge and head assemblies. Direct clamping in an tau will instantly mark or ovalize the shaft. This clamp

sublicensing

Tested torque: up to ~1

only needed if the body/piggyback is actively leaking

Use 20wt Gold on air side lowers

Unscrew mid-valve (12mm wrench) from the flats at the bottom without touching the VVC rebound and shims

Open the bleed port slowly

Only choose this if you actually need to open the base valve or damper tube

Material: TPU

Requires a 6-in-1 top cap socket for top cap removal

If you don’t have a printer

Slide the cylinder to the 0% position

Manual / hand bleed (as intended by FOX)